Sabado, Agosto 30, 2014

Introduction Why Rymal Station

Posted by Unknown on 5:00 PM in , , , | No comments

Hello All!

This is the first post in my new blog so I’d like to introduce myself and the aim of this blog. My name is Peter and I have been interested in trains as long as I can remember. Part of that interest, a large part in fact, includes model railroading. My interest is in modern-day CN and CP operations, with some shortline modeling as well (GEXR, OSR). I have been reading several other model railroad blogs for some time now and it has inspired me to start my own. Hence, the idea of this blog is to document the progress on my home layout, as well as some prototype photos as well. 

I say ‘my’ home layout, but in fact it was started by my dad about 20 years ago. He designed most of the track plan, and completed the benchwork and the majority of the track work. My brother Mark and I are now working with dad to complete the trackwork and at the same time convert the layout to DCC. I’ll post more info and a track plan later, but hopefully this brings you up to speed with where I’ll start this blog. I hope in the foreseeable future to get the trackwork running reliably and start adding some scenery to the layout.

Why Rymal station?

Well, the short answer is that I had to call this blog something. The long answer is that it seems many modelers name their layout or blog after something meaningful to them or their modeling. Rymal was a small hamlet on the south edge of Hamilton, ON, and bears the name of William Rymal, an early settler of the area; it has long since been amalgamated with the city of Hamilton. Rymal, sometimes referred to as Dartnall or Hannon, was important enough to warrant a station on the CNR line from Hamilton to Jarvis (originally Hamilton & Lake Erie; I’ll post more info on the station itself later). This was the line made famous for its’ street running down the middle of Ferguson Ave in Hamilton, and later the use of an A-B-A set of F7’s on the Hamilton-Nanticoke steel train; again, more info to be posted on the steel train later on. My house is located about four miles from where the station stood, and my dad grew up less than a mile from the station’s location (though it was demolished about three years before he was born). And at one time many years ago, my great-grandfather ran the Rymal feed mill (actually named Ancaster feed mill for reasons long lost to history), and would bring in boxcars of grain to the siding at Rymal for use as animal feed. So not only was it geographically the closest rail point of interest, but in some strange way it seems to make sense.

I’ll try to update this blog as often as time permits, but until then, thanks for stopping by!

Cheers,

Peter.

0 (mga) komento:

Mag-post ng isang Komento